Dry soap. Clean counter. Every time.

The SLOY Soap Holder Mini is a 3D-printed bathroom accessory made from plant-based PLA | The same material and design language as the rest of the SLOY family. Mount it in your shower or above the sink and keep your soap bar exactly where it should be – off wet surfaces, draining properly, lasting longer.

Its built-in reservoir catches soap residue and water so your shelf or tile stays clean. Suitable for standard soap bars and small bathroom accessories, with a maximum load capacity of 150g. Tested for humid shower environments, made to stay.

Tape-mounted. No drill. No compromise.

Every SLOY Soap Holder comes with a separate wall mount featuring a pre-applied industrial-grade acrylic foam adhesive strip – the same technology used in professional mounting solutions like tesa Powerstrips Heavy, but permanent. Once bonded to a solid, clean surface, it locks in place and stays there. It can be carefully removed with a flat metal spatula if needed.

Before mounting, always:

• Check that the surface is solid, load-bearing, and free of cracks or hollow spots.
• Clean the surface thoroughly – free of dust, grease, soap residue, or moisture.
• Allow up to 72 hours of curing time before loading the holder. After 24 hours, max. 0,1kg.
• Never mount on wallpaper, painted plaster that is not firmly bonded, or porous surfaces.

Part of the SLOY family

The SLOY Soap Holder Mini is the founding piece of the SLOY family | same pill-shaped silhouette, same colour palette, same plant-based material as the SLOY Hook and Soap Holder. Mix and match across your bathroom for a cohesive, considered look.

Product Details

• Dimensions & Weight (Soap Holder): 83mm × 83mm × 25mm, 85g
• Dimensions & Weight (Wall Mount): 82mm × 35mm × 20mm, 20g
• Load capacity: max. 150g
• Material: PLA – Polylactic Acid, a plant-based material derived from corn starch. Industrially compostable according to ISO 14855. Not suitable for home composting.
• Mounting: Separate wall mount with pre-applied industrial acrylic foam tape (permanent)
• Package includes: 1× Soap Holder, 1× Wall Mount with adhesive tape
• Available in: 9 colours
• Made in Hamburg, Germany

Environment

PLA is made from renewable plant sources, not fossil fuels. Important: It is industrially compostable at end of use (ISO 14855) – not in the home composter. At SLOY, every product is hand-assembled locally in Hamburg.

3D Printed · Plant-based · Made in Hamburg

Please read the instructions before use.